The platform brake tester is a multi-purpose and high-efficiency automobile braking performance testing equipment. Its biggest feature is that the automobile is tested in the moving process, which can truly reflect the actual braking performance. The platform braking test process is simple and time-saving, and all test items can usually be completed within 60 seconds.

The effective measurement length of the WT-4000 Automobile Curb Weight Tester is 4000mm. For three-axle and above vehicles, it can ensure that the wheels on the same side of each articulated axle of the double and triple articulated axles stop on one weighing plate at the same time. During measurement, keep the vehicle under test level, drive the vehicle to the test platform smoothly and slowly axle by axle in turn (regard the articulated double axles and articulated triple axles as one axle), and after it is stable and stationary, measure the axle load of the axle; calculate the sum of all axle loads, which is recorded as the curb weight of the vehicle.

The automobile chassis clearance tester is used to check the clearance status of the automobile suspension and steering system. The tester uses hydraulic power to push the left and right platforms to move. Under the stressed state, it can effectively check the clearance of the suspension, steering mechanism and other parts. The product implements the standard JT/T 633 "Automobile Suspension and Steering System Clearance Tester". It is suitable for various types of vehicles with an axle load not exceeding 13 t and a wheel track in the range of 1250 mm～2050 mm.

Vehicle Contour Dimension Detector is mainly used for the automatic measurement of vehicle contour dimensions (length, width, height, number of axles, wheelbase). It adopts pass-through, fully automatic dynamic measurement technology. After the vehicle drives out of the detection area, the system automatically calculates the length, width and height of the vehicle's contour dimensions.

1.三工位配置 2. 选配服务器（2条线及以上，选配此配置以上的服务器） 3. 选配PDA拍照系统配置 4. 选配车辆图像拍照系统配置 5.选配站长管理工位配置